Condensation in the house is a rather serious problem, in fact an excessive increase in humidity can cause a series of damage to health , the property and the objects in the house.
The greater proliferation of mold and bacteria, caused by the condensation of water vapor, can ruin clothes, plasters and furnishings , as well as favoring some respiratory and cardiovascular diseases.
Temperature and humidity, in fact, are two essential parameters to guarantee living well-being, to be monitored with great attention so that the interior spaces are safe and comfortable environments without risks.
Today there are efficient solutions to eliminate condensation , with the possibility of using specific tools to ensure perfect indoor air quality and protect the building and its occupants.
The most effective solutions to remove condensation from the home
Relying on the experience of Murprotec , for example, a company that has been dealing with definitive treatments against humidity since 1954, it will be possible to eliminate condensation thanks to the CTA filter , a device capable of removing up to 90% of microparticles with a smaller size at 10 microns.
These filters are used in special Murprotec AHU systems, innovative systems to combat condensation and humidity in closed spaces, whose periodic replacement guarantees high standards of efficiency and quality.
This system represents a more effective solution than classic dehumidifiers , as they are often not sufficient on their own to eliminate condensation from the house in an optimal way. A more aggressive approach to this problem allows us not to expose the home and family members to the risks due to an indoor environment that is too humid, to ensure that the environmental microclimate is actually the ideal one.
An AHU system is a very efficient centralized system, as it treats indoor air through overpressure , controlling the levels of condensation, humidity and air quality, avoiding the excessive presence of dangerous pollutants and mold.
The CTA filters can be replaced every 6 months, so it is a sustainable expense, after which it is enough to carry out a monthly cleaning of the suction grille and a suction operation of the internal part with a conventional vacuum cleaner approximately every 3 months .
Some useful tips to prevent condensation in the house
In addition to the use of special devices to eliminate condensation, it is possible to adopt good practices for the prevention of this phenomenon inside your home.
First of all, it is important to favor proper ventilation of indoor environments, therefore it is necessary to open the windows frequently, especially while cooking, or immediately after a shower, avoiding that water vapor can remain trapped inside and cause damage from condensation humidity. .
Another precaution concerns the use of few plants in closed spaces , especially in the rooms more subject to the formation of condensation, in fact some species can increase the humidity making the situation worse.
Even the laundry should be hung outside , avoiding letting the clothes dry inside the house, otherwise in the absence of an external space it is possible to hang the clothes in a room with the door closed, by activating a device to eliminate excess condensation and leaving ventilate the room for several minutes immediately afterwards.
What is the right microclimate for indoor environments
Condensation can be controlled through an approach that is based on the control of three aspects: the ambient temperature, the humidity rate and a series of good habits that can reduce the presence of water vapor particles in the home.
According to the guidelines of the Ministry of Health, it is important to try to keep the humidity level below 50% , with an optimal value of 45%.
As for the temperature , experts recommend a value of around 20 ° C , considered ideal for avoiding a high concentration of condensation inside the building.
Where necessary, the use of dehumidifiers and filtering devices is recommended , however it is essential to carry out a correct periodic maintenance of the systems, to ensure that an adequate level of efficiency and an optimal air treatment capacity are maintained.
